routing-dibond

Routing Dibond®

Dibond® is a three-layered sheet material. The core consists of a polyethylene layer with a thin aluminum layer of 0.3 mm thick on both sides. This is why
Dibond® is often referred to as a “sandwich panel”. Dibond® is weather & wind and temperature resistant and is also lightweight, making it easy to work with.

Tools for routing Dibond®

Diager ref.	D1	D2	L1	L2	Z	Helix	Coating	+ Coating	With ring for Zünd machines
4001-X0200	⌀ 2 mm	⌀ 6 mm	50 mm	3 mm	1	Positive	Yes	4001-NHC0200	4001-NHC0200-B
4001-X0300	⌀ 3 mm	⌀ 3 mm	40 mm	4,5 mm	1	Positive	Yes	4001-NHC0300
4001-X0300A	⌀ 3 mm	⌀ 6 mm	50 mm	4,5 mm	1	Positive	Yes	4001-NHC0300A	4001-NHC0300A-B
4001-X0400	⌀ 4 mm	⌀ 4 mm	50 mm	6 mm	1	Positive	Yes	4001-NHC0400
4001-X0400A	⌀ 4 mm	⌀ 6 mm	50 mm	6 mm	1	Positive	Yes	4001-NHC0400A	4001-NHC0400A-B
4001-X0600	⌀ 6 mm	⌀ 6 mm	50 mm	9 mm	1	Positive	Yes	4001-NHC0600	4001-NHC0600-B
4001-X0800	⌀ 8 mm	⌀ 8 mm	60 mm	12 mm	1	Positive	Yes	4001-NHC0800
4001-X1000	⌀ 10 mm	⌀ 10 mm	65 mm	15 mm	1	Positive	Yes	4001-NHC1000

Other sizes and diameters of these tools for Alucobond® can be found in the catalogue of Diager Industrie on page 19 or contact us for more info.

Vouwlijnen in Dibond® frezen

Dankzij de hogesnelheids tweesnijders van Diager kan je makkelijk en vlot groeven en vouwlijnen in Dibond® aanbrengen. Het gereedschap kan aan hoge snelheid ingezet worden en garandeert een hoog afwerkingsniveau.

Diager ref.	Ketele ref.	D1	D2	D3	L1	L2	L3	Z	Helix	α°
4045–12-095°		⌀ 12 mm	⌀ 12 mm	2 mm	60 mm	–	4,7 mm	2	Positive	95°
4045–16-095°		⌀ 16 mm	⌀ 10 mm	3 mm	50 mm	15 mm	6,1 mm	2	Positive	95°

Other sizes and diameters of these tools for routing fold lines in Alucobond® can be found in the Diager Industrie catalogue on page 37 or contact us for more info.

Routing strategy for Dibond®

Material thickness	⌀ shaft	⌀ cutting edge	Feed	Speed RPM	Direction
4 mm	6 mm	4 mm	100 mm / sec	24.000 RPM	Conventional

The ‘+ Coating’ ensures even longer life of your routing tools, the cutters with shank diameter 6 mm are available with a brass ring, so you can also use the tools on a Zünd machine.

Depending on machine and spindle power, other values may apply.