Routing Dibond®
Dibond® is a three-layered sheet material. The core consists of a polyethylene layer with a thin aluminum layer of 0.3 mm thick on both sides. This is why
Dibond® is often referred to as a “sandwich panel”. Dibond® is weather & wind and temperature resistant and is also lightweight, making it easy to work with.
Tools for routing Dibond®
Diager ref. | Ketele ref. | D1 | D2 | L1 | L2 | Z | Helix | Coating | + Coating | With ring for Zünd machines |
|---|---|---|---|---|---|---|---|---|---|---|
4001-X0200 | ⌀ 2 mm | ⌀ 6 mm | 50 mm | 3 mm | 1 | Positive | Yes | 4001-NHC0200 | 4001-NHC0200-B | |
4001-X0300 | ⌀ 3 mm | ⌀ 3 mm | 40 mm | 4,5 mm | 1 | Positive | Yes | 4001-NHC0300 | ||
4001-X0300A | ⌀ 3 mm | ⌀ 6 mm | 50 mm | 4,5 mm | 1 | Positive | Yes | 4001-NHC0300A | 4001-NHC0300A-B | |
4001-X0400 | ⌀ 4 mm | ⌀ 4 mm | 50 mm | 6 mm | 1 | Positive | Yes | 4001-NHC0400 | ||
4001-X0400A | ⌀ 4 mm | ⌀ 6 mm | 50 mm | 6 mm | 1 | Positive | Yes | 4001-NHC0400A | 4001-NHC0400A-B | |
4001-X0600 | ⌀ 6 mm | ⌀ 6 mm | 50 mm | 9 mm | 1 | Positive | Yes | 4001-NHC0600 | 4001-NHC0600-B | |
4001-X0800 | ⌀ 8 mm | ⌀ 8 mm | 60 mm | 12 mm | 1 | Positive | Yes | 4001-NHC0800 | ||
4001-X1000 | ⌀ 10 mm | ⌀ 10 mm | 65 mm | 15 mm | 1 | Positive | Yes | 4001-NHC1000 |
Other sizes and diameters of these tools for Alucobond® can be found in the catalogue of Diager Industrie on page 19 or contact us for more info.
Routing V cuts in Dibond
Thanks to Diager's high-speed twin cutters, you can easily and smoothly apply grooves and fold lines in Dibond. The tool can be used at high speed and guarantees a high level of finish.
Diager ref. | Ketele ref. | D1 | D2 | D3 | L1 | L2 | L3 | Z | Helix | α° |
|---|---|---|---|---|---|---|---|---|---|---|
4045–12-095° | ⌀ 12 mm | ⌀ 12 mm | 2 mm | 60 mm | – | 4,7 mm | 2 | Positive | 95° | |
4045–16-095° | ⌀ 16 mm | ⌀ 10 mm | 3 mm | 50 mm | 15 mm | 6,1 mm | 2 | Positive | 95° |
Other sizes and diameters of these tools for routing fold lines in Alucobond® can be found in the Diager Industrie catalogue on page 37 or contact us for more info.
Routing strategy for Dibond®
Material thickness | ⌀ shaft | ⌀ cutting edge | Feed | Speed RPM | Direction |
|---|---|---|---|---|---|
4 mm | 6 mm | 4 mm | 100 mm / sec | 24.000 RPM | Conventional |
The ‘+ Coating’ ensures even longer life of your routing tools, the cutters with shank diameter 6 mm are available with a brass ring, so you can also use the tools on a Zünd machine.
Depending on machine and spindle power, other values may apply.
EN 
NL 
FR